There are three buttons on the port control panel that allow Pio Users to control the port as follows:
Power button
To start the port, push the power button.
If you want to shut down the port, push and hold the power button for 5 seconds until the power light disappears.
Port "Retry" button
Push the "Retry" button to repeat an action that has previously failed; e.g. bin didn't return into the grid, or the status light is red.
Emergency stop
In the event of an emergency, press the "Emergency Stop" button located on the right-hand side of the control panel.
Release the E-stop button by twisting it when you are ready to start the port work again.
Please note that the "Emergency Stop" button on the control panel only stops the specific port it is connected to. Other ports and the rest of the Pio system will continue to operate normally.